Waterloo F1521A1-4 Manuel d'utilisateur télécharger pdf (Page 7)

Carefully align slides and

push drawer in until

drawer stops.

STEP 6:

• Insert the drawer slides (Gd) into the workbench slides (Gu)

and push all of the way to the back.

• Pull the drawer open until it stops to ensure proper assembly.

• Repeat for the rest of the drawers.

• Square the unit and adjust for optimum drawer performance.

• Wrench tighten all fasteners.

• Remove drawers. (See drawer removal instructions.)

• Attach K, as shown, using (2) FF, (2) HH and (2) JJ.

• Finger tighten. (Do not wrench tighten until step 6.)

FF(2)

JJ(2)

HH(2)

STEP 5 - continued:

• Position H as desired.

• Mark centers of (8) square mounting holes.

Square

Mounting

Hole

• Turn H over. (Use packaging material to avoid scratching.)

• Drill (8) 1/8" (3mm) pilot holes 1/2" (13mm) deep.

STEP 7:

1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

Pas de commentaire

Waterloo F1521A1-4 Manuel d'utilisateur Page 7